Pulling device for harvesting of Oleaginous Flax
Volodymyr Didukh
, Svitlana Yaheliuk
, Volodymyr Bodak
, Maksym Bodak, Olexandr Yaheliuk
Abstract: Oleaginous Flax is harvested using direct combining to obtain seeds. During this process – Stem-Fiber Mass (SFM) is disposed of by incineration or shredding. Both cases are harmful to the environment. With a sufficient amount of moisture and heat, a short non-oriented fiber is formed in a stem. The fiber creates a problem in the operation of the cutting device of the harvester. Especially, when harvesting Oleaginous Flax in the phase of full ripeness, when the fiber has strengthened and the woody part has turned into a shives. Thus, it is possible to save the grown crop by pulling the stems. Well-known technical means of pulling flax stems have a small width of grip, which affects their productivity. The solution to the problem lies in the creation of the harvesting working bodies, taking into account the width of the harvester. Such a device, when installed on the harvesting part of the combine, should not disturb its structure. As a section of the working body, a pair of rollers of the appropriate geometric shape, rotating towards each other, is offered. The technological process of stem pulling involves capturing a certain number of stems with rotating surfaces and clamping them in the space between the surfaces. Superimposition of surface rotation speeds and forward speed of the grain harvester helps pull the stems out of the soil. This approach makes it possible to preserve the grown crop of Oleaginous Flax and create prerequisites for the use of the SFM.
Keywords: harvester; Oleaginous Flax; pulling device; rollers; stem
Citation: Didukh, V., Yaheliuk, S., Bodak, V., Bodak, M. & Yaheliuk, O. (2024). Pulling device for harvesting of Oleaginous Flax. Bulg. J. Agric. Sci., 30(3), 539–546
| References: (click to open/close) | Alsharifi, S. K. A., Arabhosseini, A., Kianmeher, M. H. & Kermani, A. M. (2017). Effect of moisture content, clearance, and machine type on some qualitative characterstics of rice on (Tarm Hashemi) cultivar. Bulg. J. Agric. Sci., 23(2), 348-355.
Aziz, R. A. & Aziz, S. A. (2018). Application of Box Behnken Design to Optimize the Parameters for Kenaf-Epoxy as Noise Absorber, IOP Conference Series: Materials Science and Engineering, 454, 1-11. https://iopscience.iop.org/article/10.1088/1757-899X/454/1/012001/pdf.
Busnyk, V., Didukh, V. & Bodak, M. (2018). Pulling device for collecting oilseed flax. Patent on KM No. 129695. Application. 25.04.2018. Publ. 11/12/2018. No. 21 (Ukr).
Didukh, V., Yaheliuk, S., Artyukh, T., Albota, D. & Goliy, O. (2022). Decrease of elastic properties of Oleaginous Flax residues by decortication. INMATEH - Agricultural Engineering, 67(2), 285-292.
Didukh, V., Busnyuk, V. & Bodak, M. (2022). Ustification of the equipment for harvesting oil flax with a combine harvester. Collection of scientific papers “Central Ukrainian Scientific Bulletin. Technical Sciences”, Kropyvnytskyi, 5(36), 226-235 (Ukr).
Dudarev, I. (2015). Theoretical foundations of modernization of machines for the production of flax: monograph. Lutsk (Ukr).
Dudarev, I. & Say, V. (2020). Development of resource-saving technology of linseed harvesting. Journal of Natural Fibers, 17(9), 1307-1316. DOI: 10.1080/15440478.2018.1558161 (Ukr).
FAOSTAT (n.d.) (2021). Compare Data URL: https://www.fao.org/faostat/en/#compare.
Hamzah, I. J. & Alwan Alsharifi, S. K. (2020). Innovative harvesting methods about the harvest losses for two machines. Bulg. J. Agric. Sci., 26(4), 913–918.
Onyuh, Y., Didukh, V. & Taraimovich, I. (2016). Study of the conditions for growing oilseed flax. Agricultural Machinery, 34, 104–111 (Ukr).
Ouagne, P., Barthod – Malat, B., Evon, P., Labonne, L. & Placet, V. (2017). Fibre extraction from Oleaginous Flax for technical textile applications: influence of pre-processing parameters on fibre extraction yield, size distribution and mechanical properties. Procedia Engineering, 200, 213-220.
Rudik, N. (2020). Potential of oil bearing flax production in Ukraine. Agrosvit, 2, 61-68 (Ukr).
Tretjakova, R., Martinovs, A., Avisane, M. & Kolcs, G. (2018). Lake blue clay - sapropel - flax shive briquettes for water absorption and desorption. Agronomy Research, 16(S1), 12661277. 2018. https://doi.org/10.15159/AR.18.091.
Wendel, C. (2004). Farm Implements & Antiques.- USA: Krause Publication, 497.
Yaheliuk, S., Didukh, V., Busnyuk, V., Boyko, G. & Shubalyi, O. (2020). Optimization on efficient combustion process of small-sized fuel rolls made of Oleaginous Flax residues. INMATEH – Agricultural Engineering, 62(3), 361–368. DOI: https://doi.org/10.35633/inmateh-62-38.
|
|
| Date published: 2024-06-25
Download full text 
